TRIZ

Toshiba developed thin and light battery (62mm x 35mm x 3.8mm),
takes one minute to charge it to 80 percent capacity. Link

This is the picture of the No Flush Urinal, it does not requires pipe in water to flush, it employs a eco trap system. see the link below on how the eco trap works

http://www.candlsupply.com/products/waterless/ecotrap.htm

This is the coolest fan I saw, turn it on and neon like advertisment starts to appear, all due to technology and innovation.

Weight of moving object - The mass of the object, in a gravitational field. The force that the body exerts on its support or suspension.

Weight of stationary object - The mass of the object, in a gravitational field. The force that the body exerts on its support or suspension, or on the surface on which it rests.

Length of moving object - Any one linear dimension, not necessary the longest, is considered a length.

Length of stationary object - Any one linear dimension, not necessary the longest, is considered a length.

Area of moving object - A geometrical characteristic described by the part of a plane enclosed by a line. The part of a surface occupied by the object. OR the square measure of the surface, either internal or external of an object.

Area of Stationary object - A geometrical characteristic described by the part of a plane enclosed by a line. The part of a surface occupied by the object. OR the square measure of the surface, either internal or external of an object.

Volume of moving object - The cubic measure of space occupied by the object. Length x width x height for a rectangular object, height x area for a cylinder, etc.

Volume of stationary object - The cubic measure of space occupied by the object. Length x width x height for a rectangular object, height x area for a cylinder, etc

Speed - The Velocity of an object, the rate of a process or action in time.

Force - Force measures the interaction between systems, in Newtonian physics, force = mass x acceleration. In Triz, force is any interaction that is intended to change an object's condition.

Stress or Pressure - Force per unit area. Also Tension.

Shape - The external contours, appearance of a system.

Stability of the object's composition - The wholenes or integrity of the system; the relationship of the system's constituent elements. Wear, chemical decomposition, and disassembly are all decreases in stability. Increasing entropy is decreasing stability.

Strength - The extent to which the object is able to resist changing in response to force. Resistance to breaking.

Duration of action by a moving object - The time that the object can perform the action. Servie life. Mean time between failure is a measure of the duration of action. Also, durability.

Duration of action by a stationary object - The time that the object can perform the action. Servie life. Mean time between failure is a measure of the duration of action. Also, durability.

Temperature - The thermal condition of the object or system. Loosely includes other thermal parameters, such as heat capacity, that affect th rate of change of temperature.

Illumination intensity - Light flux per unit area, also any other illumination characteristics of the system such as brightness, light quality, etc.

Use of energy by moving object - The measure of the object's capacity for doing work. In classical mechanics, Energy is the product of force times distance. This includes the use of energy provided by the super-system such as electrical energy or heat. Energy required to do a particular job.

Use of energy by stationary object - The measure of the object's capacity for doing work. In classical mechanics, Energy is the product of force times distance. This includes the use of energy provided by the super-system such as electrical energy or heat. Energy required to do a particular job.

Power (jargon) - The time rate at which work is performed. The rate of use of energy.

Loss of Energy - Use of energy that does not contribute to the job being done. Reducing the loss of energy sometimes requires different techniques from improving the use of energy,which is why this is a separate catergory.

Loss of substance - Partial or complete, permanent or temporary, loss of some of a system's materials, substances, parts, or subsystems.

Loss of information - Partial or complete, permant or temporary, loss of data or acces to data in or by a system. Frequently includes sensory data such as aroma, texture, etc.

Loss of Time - Time is the duration of an activity. Improving the loss of time means reducing the time taken for the activity. "Cycle time reduction" is a common term.

Quantity of substance/the matter - The number or amount of a system's materials, substances, parts or subsystems which might be changed fully or partially, permanently or temporarily.

Reliability - A system's ability to perform its intended functions in predictable ways and conditions.

Measurement accuracy - The closeness of the measured value to the actual value of a property of a system. Reducing the error in a measurement increases the accuracy of the measurement.

Manufacturing precision - The extent to which the actual characteristics of the system or object match the specified or required characteristics.

External harm affects the object -Susceptibility of a system to externally generated (harmful) effects.

Object-generated harmful factors - A harmful effect is one that reduces the efficiency or quality of the functioning of the object or system. These harmful effects are generated by the object or system, as part of its operation.

Ease of manufacture - The degree of facility, comfort or effortlessness in manufacturing or fabricating the objecti/system.

Ease of operation - Simplicity: The process is NOT easy if it requires a large number of people, large number of steps in the operation, needs special tools, etc. "Hard" processes have low yield and "easy" process have high yield; they are easy to do right.

Ease of repair - quality characteristics such as convenience, comfort, simplicity, and time to repair faults, failures, or defects in a system.

Adaptability or versatility - The extent to which a system/object positively responds to external changes. Also, a system that can be used in multiple ways for under a variety of circumstances.

Device complexity - The number and diversity of elements and element interrelationships within a system. The user may be an element of the system that increases the complexity. The difficulty of mastering the system is a measure of its complexity.

Difficulty of detecting and measuring - Measuring or monitoring systems that are complex, costly, require much time and labor to set up and use, or that have complex relationships between components or components that interfere with each other all demonstrate "difficulty of detecting and measuring." Increasing cost of measuring to a satisfactory error is also a sign of increased dificulty of measuring.

Extend of automation = The extent to which a system or object performs its functions without human interface. The lowest level of automation is the use of a manually operated tool. For intermediate levels, humans pogram the tool, observe its operation, and interrupt or re-program as needed. For the highest level, the machine senses the operation needed, programs itself, and monitors its own operations.

Productivity - The number of functions or operations performed by a system per unit time. The time for a unit function or operation. The output per unit time, or the cost per unit output.

Whatever way you look at it, that is 6 beers afterward.

1. Weight of moving object
2. Weight of stationary object
3. Length of moving object
4. Length of stationary object
5. Area of moving object.
6. Area of stationary object.
7. Volume of moving object.
8. Volume of stationary object.
9. Speed
10. Force.
11. Stress or pressure
12. Shape.
13. Stability of the object's composition.
14. Strength
15. Duration of action by a moving object.
16. Duration of action by a stationary object.
17. Temperature.
18. Illumination intensity (jargon)
19. Use of energy by moving object
20. Use of energy by stationary object.
21. Power (jargon)
22. Loss of Energy.
23. Loss of substance
24. Loss of information.
25. Loss of Time.
26. Quality of substance / the matter
27. Reliability.
28. Measurement accuracy.
29. Manufacturing precision.
30. External harm affects the object.
31. Object-generated harmful factors.
32. Ease of manufcture.
33. Ease of operation.
34. Ease of operation.
35. Adaptability or versatility.
36. Device complexity.
37. Difficulty of detecting and measuring.
38. Extent of automation.
39. Productivity.

Speed of Change

Competitive edge

Innovative not mere refinements

Value Addition to value Creation

Beyond quick fixes

Innovating vs Problem solving

Improve system, service, product, process and quality.

Created using Flash- Let there be innovation and creativity on Earth. May the force be with you.


Strange animation did not kick off....

Now the Mobile phone will recognize you the user , so ladies don't do to excessive make up , you phone may refuse to turn on. Link

Japanese researchers said they have developed the first face-recognition technology for mobiles as a security measure due to the growing use of cellphones for advanced operations such as personal finance.

To turn on the cellphone, an internal camera will take a snapshot of the potential user and within one second match it with a photograph on file of its owner.

The Omron Corporation, based in the western city of Kyoto, said the technology "has been designed to protect information even when the mobile phone is lost or stolen."